about 34" sbach 300 6mm depron sport plane:
This plane is simply a blast to fly, it is fully
aerobatic and just a fun plane to fly. It is
best classified as a /aerobatic/sport/profile plane.
With great racer looks, it can be a super choice for
park pylon racers too!
Warning! This aircraft is not a toy. If built or flown incorrectly, this plane can cause damage property or injury to people. User assumes all responsibility and risk. It should be flown only in fields specifically reserved for RC aircraft which have been approved by the AMA. It is highly recommended that you join the AMA if you are not already a member.
specifications:
- Wing Span: 34 inch
- Length: 27 inch
- Weight with no battery: 8 oz (depending on motor & equipment used)
- Ready to Fly Weight: 9 - 10 oz with 850mAh 11.1v 3S Lipo
Center of Gravity
Start with about 1/3 wing chord. Test
fly it then move the battery forward or rearward to suit
your 3D needs. The plane should fly hands off in straight
level flight both upright and inverted when proper CG is
used.
Aileron , Elevator, and Rudder Throws
- 30 to 45+ degrees deflection for each direction depending on your preference
- Dual Rates optional
- Expo is at your preference 20% to 40%
needed to build and finish:
- Foam Safe / Odorless CA glue + Foam Safe Accelerator
- 20 min or 30min Epoxy
- Latex or vinyl gloves
- Sandpaper
- Hobby Knife
- Ruler
- Blenderm Hinge Tape
required equipment:
- 4 Channel Transmitter + Micro Receiver
- 3 Micro Servos (9 gram) (HXT900, TP90 or similar)
- Micro sized low KV Outrunner (20 grams or under)
- 2730 motor 1300kv, 1500kv, or 1700kv (Keda, Hextronic, or Turnigy)
- ESC: 12Amp up to 20Amp, depending on motor used
- Prop: GWS 8040
- Lipo Battery: 460 ~ 850 mAh 11.1v 3S
recommended set up:
- Motor: Black Magic BM2208-1260 kv
- ESC: ZTW 20Amp
- Battery: Nano-Power 850mAh 3S 11.1V 45C Lipoly Pack
- Prop: GWS 8040
Economy/light set up:
- Motor: Keda BR2730 - 1300kv, 1500kv, or 1700kv
- ESC: ZTW 12Amp
- Battery: 460mAh 3S 11.1V
- Prop: GWS 8040
|
