logo
header

   nanoplanes' products

home    |    contact us    |    videos      
Solution Graphics

free shipping

nanofalcon rc slope glider


Items required to complete see compete components

  • One full sheet of 3mm Depron and balsa ailerons
  • Print the downloaded the plan as tiled
  • 5 Pushrods + 1 Pushrod tube
  • 4 Dubro Micro control horns
  • 3 Dubro Ez-connectors
  • 2 Carbon fiber tubes
  • 1 Balsa wood short stick for servo mount
  • Balsa wing rib
  • Kevlar blended string
  • 4 Magnets

download buttondecal button

Click Here to Download Free Plan
Kits are discontinued

Click each photo for larger image


falcon-glider img   falcon-glider img   falcon-glider img   falocn-glider img

youtube button

about nanofalcon glider:

This is a very unique approach to slope gliders. It will change your mind of what you thought about Depron gliders. (If you ever even thought about it) Although it is made with Depron it can be very durable when covered with light packing tape. It has a large flight envelope; in light to moderate winds it is a great light weight aerobatic glider, but in stronger winds it will zip around like an mini slope racer with the addition of a couple ounces of ballast.
With no bad habits this little glider can handle most aerobatics that a Flaperon/Elevator glider can perform. For those who want full house aerobatic capabilities you can easily add a second elevator servo, one for each side of the V-tail, and transform your elevator into a Ruddevator!

specifications:

  • Wing Span: 30 inch
  • Length: 23 inch
  • Dry weight: 3.5oz
  • Ready to Fly Weight: 4.2oz with 1S2P 3.7v 900mAh

needed building tools:

  • Foam Safe / Odorless CA glue + Foam Safe Accelerator
    (User Friendly Odorless “UFO” highly recommended)
  • Blenderm Hinge Tape or Transparent Scotch Tape
  • Sandpaper + Sanding Bar
  • Hobby Knife
  • Ruler (preferably metal)
  • Wax Paper

required equipment:

  • 4 Channel Transmitter + Receiver (AR6000, AR6100E, AR6110E, or similar size)
  • 3 Micro Servos: 4.4 gram servos for the Ailerons and up to 9 gram servo for Elevator
    (Turnigy 1440A, HXT900, or similar)
  • 2 servo extensions only if using the Turnigy 4.4gram servos
  • Turnigy Voltage Booster (boosts 1 cell lipo voltage to 5v for safe Rx operation)
  • Lipo Battery:
    Minimum = 1cell Zippy 600mAh 20C
    Recommended = Two Zippy 450mAh 20C x 2 parallel = 900mAh 3.7v 1S2P
    or Two Zippy 600mAh20C x 2 parallel = 1200mAh 3.7v 1S2P
  • Maximum Battery size: 50x30x10 mm (1200mAh 3.7v 1S2P)
    (Size is very crucial here. This is the largest fit for length, width, and thickness possible
    in the small fuselage)

recommended set ups:

  • Receiver: AR6100E or AR6110E (or similar micro Rx recommended)
    (AR6000 will barely fit, very tight)
  • Turnigy Voltage Booster(boosts 1 cell lipo voltage to 5v for safe Rx operation)
  • Lipo Battery: Two (2) Zippy 450mAh 20C x 2 parallel = 900mAh acting as 1cell (900mAh 3.7v 1S2P)
    or Two (2) Zippy 600mAh20C x 2 parallel = 1200mAh as 1cell (1200mAh 3.7v 1S2P)
  • Maximum Battery size: 50x30x10 mm (1200mAh 3.7v 1S2P)
    (Size is very crucial here. This is the largest fit for length, width, and thickness possible in the small fuselage, If you install an additional elevator servo then you may wish to use the two 450mAh batteries for an easier fit.)