logo
header

   nanoplanes' products

home    |    contact us    |    videos      
Solution Graphics

free shipping

depron nanoshark rc airplane


Product Name

price

 

Standard Kit see what's included

  • All laser cut Depron parts
  • Balsa ailerons and balsa elevator
  • Plywood motor mount
  • 2 Short flat hardwood for wing servo mounts
  • 3 Pushrods + 1 Pushrod tube
  • 3 Dubro Micro control horns
  • 2 Dubro Ez-connectors
  • 1 Carbon fiber tube and 3 flat spar
  • No paper manual will be sent with your kit. Please download it from the button below

download buttondecal button

$29.99

Closeout Sale Price $15.00

Sold Out

Click each photo for larger image


nanoshark img   nanoshark img   nanoshark img   nanoshark img

youtube button

Warning! This aircraft is for experienced pilots only. This is not a PARKFLYER. Although it weighs under 2LBS, its speed can exceed 60mph. Therefore, it does not qualify as a "Parkflyer" as per AMA rules and regulations. It should be flown only in fields specifically reserved for RC aircraft which have been approved by the AMA. It is highly recommended that you join the AMA if you are not already a member. If built or flown incorrectly, this plane can cause damage property or injury to people. User assumes all responsibility and risk.

SPECIFICATION:

  • Wing Span: 30 inch
  • Length: 19.5 inch
  • Dry weight: 8.5 oz
  • Ready to Fly Weight: 12~13 oz with 3S 11.1v 1550mAh

NEEDED BUILDING TOOLS for standard kit:

  • Foam Safe / Odorless CA glue + Foam Safe Accelerator
    (User Friendly Odorless “UFO” highly recommended)
  • Blenderm Hinge Tape or Transparent Scotch Tape
  • Sandpaper and Sanding Bar
  • Hobby Knife, Pliers, and Z-bending tool
  • Ruler (preferably metal)
  • Wax Paper
  • (Optional: Self-tapping screws to install motor to plywood motor mount)

REQUIRED EQUIPMENT:

  • 4 Channel Transmitter + Receiver
    (AR6000, AR6100E, AR6110E, AR6200, AR500, AR7000, or similar)
  • 3 Micro Servos (5~8 gram) (HD-1600A or HD-1900A or HXT500 or similar)
  • Small & Light High KV Outrunner (2208, 2826, etc.)
    (Grayson Hobby Micro Jet V3 2200kv motor or Suppo Motor A2208 / 8-2600kv)
  • ESC: 20 Amp up to 35 Amp, depending on motor used
  • APC Prop: 5x5 or 6x4
  • Prop Adapter: 3.17mm (GH V3 and Suppo Motor include prop adapter)
  • Lipo Battery: 1000mAh 3s 11.1v 40C, (use smaller battery for lighter set up)
    or 1400mAh 3S 11.1v 35C, or 1600mAh 3S 11.1v 45C, or 1900mAh 3S 11.1v 45C
  • Maximum Battery size: 104x34x24mm
  • Maximum Battery weight: 162 grams

Center of Gravity

  • 1 3/4” from the leading edge at the wing root

Aileron Throw

  • Up and Down = 3/16” ~ 5/16”
  • Dual Rates for 60% low, 80% high
  • Expo is at your preference 0% to 40%

Elevator Throw

  • Up and Down = 1/8” ~ 3/16”
  • Dual Rates 50% low, 70% high
  • Expo is highly recommended at 50%

recommended set ups:

  • Fast 3S:
    Motor: Grayson Hobby Micro Jet V3 2200 KV
    ESC: ZTW 20 Amp
    Battery: 1000mAh 11.1v 40C up to 1900mAh 11.1v 45C
    Prop: APC 5x5 ~ 6x4
  • Fastest 3S:
    Motor: Suppo Motor A2208 / 8-2600kv
    ESC: ZTW 35 Amp
    Battery: 1000mAh 11.1v 40C up to 1900mAh 11.1v 45C
    Prop: APC 5x5

ABOUT NANOSHARK:

This speed plane is FAST and easy to fly. It is the big brother of the Babyshark and is a bit more tame. This plane has no bad habits at all and it can handle most aerobatics that an Aileron/Elevator aircraft can perform. It can be flown slow and low while cruising around the field like a park flyer or a crank it up and fly Wide Open Throttle high speed full elevator yank and bank pylon turns and get your heart pumping. Not quite as fast and crazy as the wicked little Babyshark but will still satisfy your need for speed. This is NOT a flat foamy plane. Expect performance like you never thought possible from a 3mm Depron foam airplane.